CHECK OUT " READY TO SHIP" -- EQUIPMENT INVENTORY -- BY CLICKING THE RESOURCES TAB
LOCATED ON THE BLACK MAIN NAVIGATION BAR BELOW.
SMART Sync - Motorized Flat Belt Conveyor - 18

SMART Sync - Motorized Flat Belt Conveyor - 18" x 118"

SMART Sync - Motorized Flat Belt Conveyor - 18

SMART Sync - Motorized Flat Belt Conveyor - 18" x 157"

SMART Sync - Motorized Flat Belt Conveyor - 18" x 39"

was $3,680.00 Special Price $3,280.00

Maripak's SMART Sync Series Motorized Flat Belt Conveyors provide a simple, seemless, and smooth product in-feed into our sealers and discharge from our tunnel's exit side to form a complete system.

These heavy duty well built plug and play modular conveyors are made to fit and match appropriately to our sealers and tunnels allowing for an excellent uninterrupted product flow.   

The SMART Sync 18" x 39" - ( 450mm x 1000mm ) Standard Style - Hard Wired Sync System - Y12 011 0021A-1MM make operation and conveyor control simple. 

Wired to connect easily with a plug and play wire harness directly into the sealer or the tunnel through the already installed connector port. Once connected it is then powered by the sealer or the tunnel through it's control panel and needs no additional power source to drive the motorized flat belt.

Check out our current inventory here... SEE OUR LIVE INVENTORY FEED

Availability: In stock
SKU
52604

Custom notifications:

This Conveyor Series is typically NOT in stock and is MTO - Made To Order, please inquire.

Request a quote by using the "Get A Quote" button along with adding any options, customization's and specific comments. A budgetary e-quote will be sent to you within minutes.

SMART SYNC SERIES - MOTORIZED - FLAT BELT - CONVEYOR #4501000MM


General Description

Conveyor - SMART Sync - Motorized Belt - 18" x 39" ( 450mm x 1000mm ) Standard Style - Hard Wired Sync System - Y12 011 0021A-1MM

Wired to connect with plug and play wire harness directly into sealer or tunnel connector port. Powered by sealer or tunnel.

INFEED Conveyor, or DISCHARGE Conveyor based on customer application - with a fully integrated sync system for complete system control, speed, On/Off, E-Stop from sealer or tunnel with connector interface cable.

Guide Rails included with infeed units only, rails not included with discharge unless specifically requested for an upcharge.


Approximate Dimensions - 22" W x 39" L 34" H - adjustable


*** Crated Weight: - 580 lbs. ***

*** Crated Dims: - 48" L x 30" W x 40" H ***

Technical Specifications

  • Fame Width: 22" Inches
  • Frame Length: 42" Inches
  • Frame Height: 34" Inches
  • Working Height: Adjustable
  • Belt Type: Flat
  • Belt Width: 18" Inches
  • Belt Length: 39" Inches
  • Belt Color: Blue
  • Crated Weight: 580 lbs
  • Crated Dims: 48" L x 30" W x 40" H


** NOTE ** If converted into a stand-alone operating unit with EBOX - electrical specs will be 220V - 10 Amp - 1 Phase

Custom notifications:

" Get A Quote " for a budgetary e-quote.

More Information
SKU 52604
Short Description

Maripak's SMART Sync Series Motorized Flat Belt Conveyors provide a simple, seemless, and smooth product in-feed into our sealers and discharge from our tunnel's exit side to form a complete system.

These heavy duty well built plug and play modular conveyors are made to fit and match appropriately to our sealers and tunnels allowing for an excellent uninterrupted product flow.   

The SMART Sync 18" x 39" - ( 450mm x 1000mm ) Standard Style - Hard Wired Sync System - Y12 011 0021A-1MM make operation and conveyor control simple. 

Wired to connect easily with a plug and play wire harness directly into the sealer or the tunnel through the already installed connector port. Once connected it is then powered by the sealer or the tunnel through it's control panel and needs no additional power source to drive the motorized flat belt.

Check out our current inventory here... SEE OUR LIVE INVENTORY FEED

Custom note

This Conveyor Series is typically NOT in stock and is MTO - Made To Order, please inquire.

Additional Info

This Conveyor Series is typically NOT in stock and is MTO - Made To Order, please inquire. Custom Wood Crating is required for shipment. An estimated LTL Freight quote will be provided by request, or customer can utilize their own freight carrier for pick-up.

Manufacturer Maripak
Manufacturer Category Conveyor
Unit of Measure each